Filter
Top Products
2. PLOTTER OPERATION
2-32
Entering a waypoint from the waypoint list
You can manually enter waypoint position from the waypoint list as follows:
1. Press the [MENU] key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST (lists waypoints in order from nearest to furthest) or
ALPHANUMERIC LIST (lists waypoints in alphanumeric order) soft key.
Alphanumeric waypoint list
▲
WPT
LOCAL
Local waypoint list
GOTO
NEW
WPT
EDIT
WPT
ERASE
WPT
RETURN
WPT
ALPHA
GOTO
NEW
WPT
EDIT
WPT
ERASE
WPT
RETURN
▲
▲
ABALONE
35°47.010'N
135°21.000'W
00:00 01JAN01
350.9
°
3.80 nm
CRAB
34°42.000'N
135°21.050'W
00:00 01JAN01
050.9°
1.98 nm
FISH
34°41.000'N
135°21.030'W
00:00 01JAN01
065.9°
1.83 nm
LOBSTER
38°44.300'N
135°21.010'W
00:00 01JAN01
144.9°
4.93nm
PUSH ENTER KNOB TO
SEARCH FOR
---
CRAB
34°42.000'N
135°21.050'W
00:00 01JAN01
050.9°
1.98 nm
FISH
34°41.000'N
135°21.030'W
00:00 01JAN01
065.9°
1.83 nm
LOBSTER
38°44.300'N
135°21.010'W
00:00 01JAN01
144.9°
4.93nm
ABALONE
35°47.010'N
135°21.000'W
00:00 01JAN01
350.9
°
3.80 nm
Alphanumeric and local waypoint lists
4. Press the NEW WPT soft key to show the waypoint window (see the figure
on the previous page). Own ship position is shown in the position box.
5. Select the position box and enter position desired.
6. If desired, change waypoint data following the instructions from step 6 in
“Entering a waypoint with the cursor” on page 2-30.
7. Press the SAVE soft key to register the waypoint.
8. Press the [MENU] key to close the menu.
2.8.2 Editing waypoint data
Waypoint data may be edited from the waypoint list or directly from the plotter
display.
Editing waypoint data from the waypoint list
1. Press the [MENU] key to open the menu.
2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys.
3. Press the LOCAL LIST or ALPHANUMERIC LIST soft key as appropriate.
4. Use the cursor pad to select the waypoint you want to edit.
5. Press the EDIT WPT soft key.
6. Edit data as appropriate.