Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-6
4. Select function desired with the cursor pad or [ENTER] knob, then press the
ENTER soft key or [ENTER] knob to register your selection.
5. Press the [MENU] key to close the menu.
Plotter function keys
Menu Item Function
Function Key
Label
OFF Assigns no function. —
ADD: ADD NEW WPT
Registers waypoint at cursor position. Place
cursor for waypoint location, then press function
key.
ADD
MWP: MOVE WPT
Moves selected waypoint to different position.
Select position, press the function key, select
new location, then push the [ENTER] knob.
MWP
RUL: RULER
Measures range and bearing between two
points. Press START POINT soft key to change
starting point if necessary. Range and bearing
between two points appears at the top of the
screen.
RUL
GWP: GOTO WPT
Specify waypoint to set as destination. Enter
name in window, then press the ENTER soft
key.
GWP
GRT: GOTO ROUTE
Specify route to follow. Enter name in window,
then press the ENTER soft key.
GRT
EML: EDIT MK/LINE
Displays mark & line menu. Press appropriate
soft key to access menu item.
EML
TRK: TRACK ON/OFF
Each press stops or starts recording of own ship
track.
TRK
TTM: TTM ON/OFF Turns TTM (target track) display on/off. TTM
DTT: DEL TGT TRACK Erases all TTM track. DTT
ALP: ALPHA LIST Displays waypoint alphanumeric list. ALP
LCL: LOCAL LIST Displays waypoint local list. LCL
RTE: ROUTE LIST Displays route list. RTE
DBX: D. BOX ON/OFF Shows/hides data boxes. DBX
CHG: CHANGE CNTRL Changes control in combination screen. CHG
Note: To use CHANGE CNTRL, set it on all displays, with the same soft key number.