Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-17
3. Rotate the [ENTER] knob to select the full-screen picture desired and push
the [ENTER] knob. A set of combination screens, corresponding to the
full-screen selected, appears.
10
20
-
-
-
-
-
-
-
-
HOT PAGE 1
Combination screen selection window
4. Rotate the [ENTER] knob to select the full screen or combination screen
desired and push it to set.
5.6 Navigator Setup
This section provides the information necessary for selecting the type of
navigator connected to your plotter.
5.6.1 Navigation data source
The NAV SETUP menu mainly selects the source of nav data. For GPS receiver
other than the GP-310B/320B, speed averaging and local time offset (to use
local time) are also available. Press the [MENU] key followed by the SYSTEM
CONFIGURATION, NAV OPTION and NAV SOURCE SETTINGS soft keys to
display the NAV SETUP menu.
NAV
SETUP
RETURN
EDIT
POSITION SOURCE
ALL
SPEED AVERAGING*
0060
LOCAL TIME OFFSET*
+00:00
TEMP CALIBRATION
00 F
DEPTH CALIBRATION
00ft
* For GPS receiver other
than GP-310B/320B.
Nav setup menu