Filter
Top Products
10. INSTALLATION
10-2
10.2 Display Unit
The display unit can be installed using either of four methods as shown below.
Refer to the outline drawing page D-1, D-2, and D-3.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the display unit away from electromagnetic field generating equipment
such as motor, generator.
• Allow sufficient maintenance space and a sufficient slack in cables for
maintenance and repair.
Table Top and Overhead Mounting
TABLE TOP OVERHEAD
Figure 10-2 Display unit mounting methods
Flush mounting type F
An optional flush mount kit type F is required. For details, see outline drawing
page D-3. (Name: Flush Mount Kit F, Type: OP20-25, Code No.: 004-393-280)
Name Type Code No. Qty
Self-tapping screw 5X20 000-802-840 4
Hex. bolt M6X12 SUS304 000-862-127 2
Spring washer M6 SUS304 000-864-260 2
Cosmetic panel 20-013-1121 100-234-240 1