Furuno GP-150-DUAL GPS Receiver User Manual


 
FURUNO
GP-150/Dual
SP-2 E4440S01A-M
060131
3.2 Data Format IEC61162-1 (JUL-2000), NMEA0183 Ver1.5/2.0
IN: (DATA 1 &2*) AGFPA, DBT, DPT, MTW, TLL,
HDG**, HDM**, HDT**, VBW**, VHW**
(DATA 3) MOB from external device (contact closure),
(DATA 4) DGPS correction data in RTCM SC-104 V2.0,
Waypoint data downloaded from YEOMAN plotter,
Waypoint data or navaids information from conventional PC
OUT: AAM, APA, APB, BOD, BWC, BWR, BWW, DTM, GBS, GGA, GLL,
GNS, RMB, RMC, Rnn, RTE, VTG, WCV, WNC, WNR, WPL, XTE,
ZDA (or LOGOUT depending on jumper setting for Port 3), Waypoint
data to conventional PC (DATA 4 only)
* GP-150-Dual: DATA 2 port is used for the system connection.
**: GP-150 only
4 POWER SUPPLY
4.1 Display Unit 12-24VDC: 0.8-0.4A (w/ internal beacon receiver)
4.2 Rectifier (PR-62, option) 100/110-115/220/230 VAC, 1 phase, 50/60Hz
5 ENVIRONMENTAL CONDITION
5.1 Ambient Temperature
Antenna Unit -20 C to 70 C
Display Unit -15 C to 55 C
5.2 Relative Humidity 95 % at +40 C
5.3 Waterproofing (IEC 60529)
Antenna Unit IPX6
Display Unit IPX5 (USCG CFR-46)
5.4 Vibration 2 - 5 Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(IEC 60945 ed.4) (7 m/s
2
maximum acceleration at 13.2 Hz)
13.2 - 100 Hz with a constant maximum acceleration of 7 m/s
2
6 COATING COLOR
6.1 Antenna Unit N9.5 (white)
6.2 Display Unit N3.0