Filter
Top Products
5. MENU OPERATION
5-10
5.4.2 System setting menus
SYSTEM SETTING 1 menu
1. Display the SYSTEM menu and press ▲ or ▼ to choose SYSTEM SETTING.
2. Press ►.
3. Press ▲ to MENU.
4. Press ◄ to choose “1.”
OFF 10sec 30sec 1min 3min 6min
OFF FLOW FROM FLOW TO
SHIP'S L/L SHIP'S LOP CURSOR L/L
POSITION :
CURRENT DATA :
HEADING INDICATION : TRUE AZ
TEMP : C F
CUSTOM KEY :
PRESET KEY
SHORT-CUT KEY
TARGET L/L : OFF ON
ETA MARK :
: SELECT
: CHANGE MENU: END
MENU
1 2
m ft fa HIRO P/B
NORTH MARK : OFF ON
CSE DATA : NAV GYRO
NAV DATA : GPS LoranC LoranA DR DECCA OTHERS
TVG CORRECTION : OFF 1/2 1/1
UNIT :
** SYSTEM SETTING 1 **
TRACK : OFF ON
NAV2 BAUDRATE : 4800 9600 19200 38400
System setting 1 menu
SYSTEM SETTING 1 menu description
POSITION: Chooses how to displays ship’s position; latitude and longitude, Decca/Loran C
LOP or Cursor L/L. (The connected navigator must be capable of displaying L/L or LOP.)
The default setting is latitude and longitude. Position data required.
TRACK: Turns the track display on or off on the horizontal display. The track is always
shown on the video plotter display regardless of this setting.
CURRENT DATA: Turns current data (tide), shown by vector, on or off. FLOW FROM
shows from what direction the current is flowing; FLOW TO shows the direction the current
is heading. The default setting is OFF. Requires a current indicator.
Current Vector
FLOW FROM FLOW TO
Current vector