Filter
Top Products
5. MENU OPERATION
5-9
5.4 SYSTEM Menu
This menu provides items which may be set according to operator’s preference. A
demonstration mode is provided to acquaint you with the many functions of this equipment,
and it may be used without connection of the transducer.
5.4.1 How to open the SYSTEM menu
1. Press the MENU key to open the menu.
2. Press ▲ to choose MENU, and then press ► to choose SYS.
3. Press ▼ to choose GO TO SYS MENU.
4. Press ◄ to choose YES.
RANGE-SONAR MODE
RANGE-VERTICAL MODE
RANGE-E/S MODE
ADJ MOTION SENSOR
TX FREQ ADJUST
TEST
TEST PATTERN
DEMO MODE
DEFAULT
: SELECT
: MENU DISPLAY MENU: END
SYSTEM SETTING:
COLOR PALETTE
LANGUAGE
SYSTEM BACKUP
LOAD BACKUP DATA
HEADING OFFSET, DRAFT OFFSET
** SYSTEM MENU **
RANGE-TRACK MODE
Adjusted at installation.
See installation manual.
See Chapter 6.
System menu
5. Press ▲ or ▼ to choose item desired.
6. Press ◄ or ► to open corresponding dialog box.
7. Press ◄ or ► to choose option.
8. Press the MENU key twice to register your selection and close the menu.