Filter
Top Products
4. ECHO SOUNDER MODE
4-2
4.2 Typical Echo Sounder Display
Press the
key to display the echo sounder picture. You can switch between the
single-frequency echo sounder display and the dual-frequency echo sounder display
alternately with the
key as shown below.
Depth/Temp. Display
Depth/Temp. Display
NAV
DATA
or
A-SCOPE
Single-freq. Display
Dual-freq. Display
NAV
DATA
or
A-SCOPE
Switching between single-frequency echo sounder and dual-frequency echo sounder displays
R 10 m
T 60°
340°
DEP
TMP
6.5 m
12. 3°C
Cursor
position
Range
Tilt angle
Fish echo
Bottom echo
Event marker
Cursor
Interference
rejector ON
10
5
Depth
(When the tilt angle
is 90 deg., the depth
measured by this
sonar is displayed
inside a rectangle.)
Water
temperature*
Range
Range marker
Range scale
Minute marker
Heading
Tilt angle indicator
(Shows tilt angle of transducer.)
Bearing
indicator
(Shows train
direction.)
CSE 357°
SPD 9.9 kt
CUR 11.0°
2.0 kt
GAIN 5.3
TVG LEVEL 4.0
DISTANCE 200 m
34° 12. 343' N
134° 34. 213' W
Position in latitude*,
longitude*
Course*, speed*
Tide direction*,
tide speed*
Gain setting
TVG level,
distance settings
Color bar
* Requires appropriate
sensor.
5
↓
Transducer status indication
+ 4
HI
Frequency
Single-frequency echo sounder display