Filter
Top Products
2. HORIZONTAL MODE
2-5
2.5 Choosing Train Center
The TRAIN control chooses the center direction of the detection range. The range of
adjustment is 0° to 354° in increments of 6°. The selected bearing is shown with a filled
circle, the train indicator, on the bearing scale.
0° (360°) → 6° → 12° → 18° → ... 354°
Train indicator
Sector
Train center
2.6 Choosing a Tilt Angle
The tilt angle shown the direction to which the sound wave is emitted. When the sound
wave is emitted horizontally, the tilt angle is said to be 0° and when emitted vertically, 90°.
To set a tilt angle, operate the TILT control. Watch the tilt angle indication and tilt angle
indicator at the top right corner of the screen. The tilt angle can be set in increments of 1°
from 0° to +5° (upward) to 0° to 90° (downward). Choose tilt angle depending on target fish.
For surface fish choose a narrow angle (about 5°) and for bottom fish, a wide angle (about
40°).
+5°
0° Horizontal direction
Transducer
Soundome
90° Vertical direction
Tilt angle setting range