2. HORIZONTAL MODE
2-29
2.15.3 Combination display examples
How to choose a combination display
1. Press the
key to show the combination display selection window.
HORZ/VERT ZOOM
HORZ/PLOTTER
HORZ/HISTORY
HORZ/VERT
2. Use ▲ or ▼ to choose the combination display desired. You may also use the
key
to choose a display.
3. Press the MENU key to close the selection window, or wait four seconds for it to close
automatically.
Note 1: Combination displays may be disabled on the SYSTEM SETTING 2 menu. Only
those displays which are turned on appear in the combination display selection window.
Note 2: If all combination displays are turned off the vertical scan combination display is
automatically shown.