Filter
Top Products
©2011 Edelbrock LLC
Part #1596, 1597, 1598 & 1599
Brochure #63-1598
Rev. 2/11 - AJ/mc
Edelbrock E-Force Supercharger System for
the 2010 Camaro SS
Installation Instructions
Page 12
54. Apply blue Loctite to the threads of the M8 x 20mm
bolt supplied in Bag #1 then use a 12mm socket and
washer to install the smaller supplied idler pulley onto the
supplied idler bracket.
55. Use a 10mm socket to remove the three water pump
bolts indicated.
56. Apply blue Loctite to the threads of the M8 x 100mm
bolts supplied in Bag #1 then use a 6mm Allen tool to
install the idler bracket onto the water pump.
57. Use a 15mm socket to remove the nut retaining the
ground strap on the passenger side cylinder head then use
a 15mm deep socket to remove the ground strap stud.
58. Apply blue Loctite to the threads of the stock
tensioner bolts then use a 15mm socket to install the
supplied tensioner bracket to the water pump.
59. Apply blue Loctite to the threads of the M10 x 65mm
bolt supplied in Bag #1 then use an 8mm allen to install it
in the countersunk bolt hole of the tensioner bracket.
60. Apply blue Loctite to the threads of an M8 x 20mm
bolt supplied in Bag #1 then use the supplied washer and
a 12mm socket to install the supplied idler pulley onto the
tensioner bracket.
61. Apply blue Loctite to the threads of the M10 x 65mm
bolt supplied in Bag #1 then use a 15mm socket to install
the supplied tensioner onto the tensioner bracket.
62. Use a 12mm socket and an M8 x 20mm bolt supplied
in Bag #1 to secure the ground strap to the back side of
the tensioner bracket.