44 Printer operation Q1860-90918
Settings and defaults
The printer makes most printing decisions based on either temporary settings or permanent
defaults.
Note Settings that are sent from software applications override printer defaults.
Setting the display language
1 Press and hold [SELECT] while turning on the printer. Hold [SELECT] until SELECT LANGUAGE
appears.
2 Release [S
ELECT]. INITIALIZING appears briefly. Wait for LANGUAGE=[(current selected
language)
] to appear.
3 Press [- V
ALUE +] repeatedly until the language you want appears.
4 Press [S
ELECT] to save your choice. An asterisk (*) appears beside the selected language.
5 Press [G
O] to exit the menu.
Table 14. Settings and defaults
Setting or default Explanation
Temporary setting A value set for the current print job by the software application or driver. For
example, a request from the software to print three copies instead of the control
panel default value of one copy is a temporary setting. The printer continues to use
the temporary setting until it receives another software request or until it is reset.
Control panel default A value set at the control panel when you select a menu item. An asterisk appears,
indicating the default setting. The printer retains this default when it is turned off.
Factory default The value set for each menu item at the factory. Factory defaults are listed in the
item column in the menu tables starting on page 47.
www.GovTechMedia.com
