A SERVICE OF

logo

162 Removing and replacing parts Q1860-90918
Delivery roller
1 Remove the top cover (see page 115) the left and right side covers (page 123) and the main
gear assembly (page 134).
2 Facing the left side of the printer, insert a flat-blade screwdriver and twist gently to release
the tab on the left side of the delivery roller (callout 1).
Note The lower delivery rollers might fall out. When you replace them, make sure they align with the
indentations in the chassis.
Figure 95. Delivery roller removal (1 of 2)
3 Release the tab on the right side of the roller in the same manner.
2
1
www.GovTechMedia.com