Q1860-90918 Chapter 3 Printer operation 43
Control panel keys
Press the control panel keys to perform the functions shown in table 13.
Table 13. Control panel keys
Key Function
[Go] Places the printer either online or offline.
Prints any data that resides in the printer’s buffer.
Allows the printer to resume printing after being offline.
Clears most printer messages and places the printer online.
Allows the printer to continue printing with an error message such as TRAY x
LOAD [TYPE] [SIZE]
or UNEXPECTED PAPER SIZE.
Confirms a manual feed request if Tray 1 is loaded and TRAY 1
MODE=CASSETTE
has been set from the Paper Handling menu on the printer’s
control panel.
Overrides a manual feed request from Tray 1 by selecting paper from the next
available tray.
Exits the control panel menus. (To save a selected control panel setting, first
press [Select].)
[Cancel Job] Cancels the print job that the printer is processing. The time it takes to cancel
depends on the size of the print job. (Press it only once.)
[Menu] Cycles through the control panel menus. Press the right end of the button to move
forward or the left end of the button to move backward.
[Item] Cycles through the selected menu’s items. Press the right end of the button to
move forward or the left end of the button to move backward.
[- Value +] Cycles through the selected menu item’s values. Press [+] to move forward or [-] to
move backward.
[Select]
Saves the selected value for that item. An asterisk (*) appears next to the
selection, indicating that it is the new default. Default settings remain when the
printer is switched off or reset (unless you reset all factory defaults from the
Resets Menu).
Prints the printer information page shown on the control panel display.
www.GovTechMedia.com
