A SERVICE OF

logo

144 Removing and replacing parts Q1860-90918
Paper-feed roller assembly
1 Remove the top cover (see page 115), the left side cover (page 123), the main gear
assembly (page 134), the paper-handling PCA (page 131), and the pickup gear assembly
(page 136).
2 Remove the paper-feed roller clutch (callout 1) that is located on the left side of the paper-
feed roller assembly. Remove the e-clip on the clutch, and slide the clutch off the shaft.
3 Free all cables from the retaining clip on the inside of the chassis, behind the left corner
cover (callout 2).
Figure 75. Paper-feed roller assembly removal (1 of 3, left side view of printer)
2
2
2
1
www.GovTechMedia.com