3 - 22
INSP
ADJ
6. Install:
• All removed parts
N
OTE:
Install all removed parts in reversed order of
their removal.
• Install the timing chain tensioner.
Refer to “CAMSHAFTS” section in the
CHAPTER 4.
N
OTE:
Turn the crankshaft counterclockwise sev-
eral turns so that the installed parts settle
into the right position.
• Recheck the valve clearance.
• If the clearance is still incorrect, repeat all
the clearance adjustment steps until the
specified clearance is obtained.
VALVE CLEARANCE ADJUSTMENT