Filter
Top Products
4 - 84
ENG
ENGINE REMOVAL
2. Install:
• Lock washer 1
• Nut (drive sprocket) 2
N
OTE:
Tighten the nut while applying the rear brake.
New
T
R
.
.
75 Nm (7.5 m · kg, 54 ft · lb)
3. Bend the lock washer tab to lock the nut.
4. Install:
• Chain guide
• Chain cover 1
• Screw (chain cover) 2
2
1
T
R
.
.
8 Nm (0.8 m · kg, 5.8 ft · lb)
5. Install:
• O-ring 1
• Dowel pin 2
• Oil hose 3
• Bolt (oil hose) 4
N
OTE:
Apply the lithium soap base grease on the O-
ring.
6. Install:
• Spring 1
• Pin 2
• O-ring 3
• Neutral switch 4
• Screw (neutral switch) 5
N
OTE:
Apply the lithium soap base grease on the O-
ring.
New
T
R
.
.
8 Nm (0.8 m · kg, 5.8 ft · lb)
New
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)