Filter
Top Products
5 - 22
CHAS
FRONT BRAKE AND REAR BRAKE
4. Install:
• Pin 1
• Plain washer 2
• Cotter pin 3
N
OTE:
After installing, check the brake pedal height.
Refer to “REAR BRAKE ADJUSTMENT” sec-
tion in the CHAPTER 3.
New
Front brake hose
1. Install:
• Copper washer 1
• Brake hose 2
• Union bolt 3
WARNING
Always use new copper washers.
CAUTION:
Install the brake hose so that its pipe por-
tion
a
directs as shown and lightly
touches the projection
b
on the caliper.
New
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
2. Install:
• Brake hose holder 1
• Bolt (brake hose holder) 2
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
3. Install:
• Brake hose holder 1
• Nut (brake hose holder) 2
N
OTE:
Align the top a of the brake hose holder with
the paint b of the brake hose.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)