Filter
Top Products
5 - 8
CHAS
4. Install:
• Collar 1
N
OTE:
Apply the lithium soap base grease on the oil
seal lip.
5. Install:
• Wheel
N
OTE:
Install the brake disc 1 between the brake
pads 2 correctly.
6. Install:
• Drive chain 1
N
OTE:
Push the wheel 2 forward and install the drive
chain.
7. Install:
• Chain puller (left) 1
• Wheel axle 2
N
OTE:
• Install the chain puller (left), and insert the
wheel axle from left side.
• Apply the lithium soap base grease on the
wheel axle.
8. Install:
• Chain puller (right) 1
• Plain washer 2
• Nut (wheel axle) 3
N
OTE:
Temporarily tighten the nut (wheel axle) at this
point.
FRONT WHEEL AND REAR WHEEL