Filter
Top Products
6 - 9
– +
ELEC
TPS (THROTTLE POSITION SENSOR) SYSTEM
3. Inspect:
• TPS coil variable resistance
Check that the resistance in increased as
the throttle grip is moved from the full
close position to the full open position.
Out of specification → Replace.
Tester (+) lead
→
Yellow lead
1
Tester (–) lead
→
Black lead
2
TPS coil variable
resistance
Tester selec-
tor position
Full closed Full opened
k
Ω
×
1
0 ~ 2 k
Ω
at 20 °C
(68 °F)
4 ~ 6 k
Ω
at 20 °C
(68 °F)
TPS REPLACEMENT AND ADJUSTMENT
1. Remove:
• TPS coupler
• Screw (TPS) 1
• TPS 2
N
OTE:
Loosen the screws (TPS) using the T25 bit.
2. Replace:
• TPS
3. Install:
• TPS 1
• Screw (TPS) 2
• TPS coupler
N
OTE:
• Align the slot a in the TPS with the projec-
tion b on the carburetor.
• Temporarily tighten the screws (TPS).
1
2
2
1
b
a