Filter
Top Products
4 - 82
ENG
ENGINE REMOVAL
EC4M3000
REMOVAL POINTS
EC4F3100
Drive sprocket
1. Remove:
• Nut (drive sprocket) 1
• Lock washer 2
N
OTE:
• Straighten the lock washer tab.
• Loosen the nut while applying the rear brake.
2. Remove:
• Drive sprocket 1
• Drive chain 2
N
OTE:
Remove the drive sprocket together with the
drive chain.
EC4M3301
Engine removal
1. Remove:
• Pivot shaft 1
N
OTE:
If the pivot shaft is pulled all the way out, the
swingarm will come loose. If possible, insert a
shaft of similar diameter into the other side of
the swingarm to support it.
2. Remove:
• Engine 1
From right side.
N
OTE:
Make sure that the couplers, hoses and cables
are disconnected.
1