Filter
Top Products
3 - 12
INSP
ADJ
AIR FILTER CLEANING
2. Clean:
• Air filter element
Clean them with solvent.
N
OTE:
After cleaning, remove the remaining solvent
by squeezing the element.
CAUTION:
• Do not twist the element when squeezing
the element.
• Leaving too much of solvent in the ele-
ment may result in poor starting.
3. Inspect:
• Air filter element
Damage → Replace.
4. Apply:
• Foam-air-filter oil or equivalent oil to the
element.
N
OTE:
Squeeze out the excess oil. Element should be
wet but not dripping.
5. Install:
• Filter guide 1
N
OTE:
Align the projection a on filter guide with the
hole b in air filter element.
6. Apply:
• Lithium soap base grease
On the matching surface a on air filter
element.