Filter
Top Products
5 - 46
CHAS
HANDLEBAR
6. Install:
• Throttle cable cap 1
• Screw (throttle cable cap) 2
WARNING
After tightening the screws, check that the
throttle grip
3
moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
7. Install:
• Cover (grip cap) 1
• Cover (throttle cable cap) 2
8. Install:
• Master cylinder 1
• Master cylinder bracket 2
• Bolt (master cylinder bracket) 3
N
OTE:
• Install the bracket so that the arrow mark a
faces upward.
• First tighten the bolt on the upper side of the
master cylinder bracket, and then tighten the
bolt on the lower side.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)