Filter
Top Products
5 - 44
CHAS
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar 1
• Handlebar holder 2
• Bolt (handlebar holder) 3
N
OTE:
• The upper handlebar holder should be
installed with the punched mark a forward.
• Install the handlebar so that the marks b are
in place on both sides.
• First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts
on the rear side.
T
R
.
.
28 Nm (2.8 m · kg, 20 ft · lb)
2. Install:
• Grip (left) 1
Apply the adhesive to the handlebar 2.
N
OTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface a
with a lacquer thinner.
• Install the grip (left) to the handlebar so that
the line b between the two arrow marks
faces straight upward.