Filter
Top Products
36
re-start up the GPS module in the either Continuous Tracking Mode or FixNow mode.
Figure 5.2 Front panel of the evaluation kit.
Figure 5.3 shows the back panel of the evaluation kit. It includes (from left to right)
the Antenna Input, Comm. Port 1, 1PPS Output, and Power Input. The Antenna Input
is a SMA female connecter which is for 3.0 V or 5.0 V active antenna depending on
the jump position (J16). The Comm. Port 1 outputs NMEA messages at the baud rate
of 19200 bps as the default setting. The 1PPS Output, which is a BNC (female) output
port, is used to output a time pulse per second. For the Power Input of the kit, it
accepts the input voltage in the range of 8 ~ 40 V.
Figure 5.3 Back panel of the evaluation kit.