Renault J8S Automobile Parts User Manual


 
ENGINE AND PERIPHERALS
Overhauling the engine
10
10-105
Remove TDC setting rod Mot. 861 or Mot. 1054 and
replace the cap.
Engine fitted with an automatic tension wheel
Undo the tension wheel fasteners half a turn and it will
automatically shift under the action of its spring and
come into contact with the belt. Redo the fasteners.
Turn the crankshaft four times and re-position the
timing at setting point.
Undo the tension wheel fasteners half a turn again and
it will automatically shift under the action of its spring
and come into contact with the belt. Redo the
fasteners.
Check the fitting tension.
16535-1R
16536S