Filter
Top Products
ENGINE AND PERIPHERALS
Overhauling the engine
10
10-102
Adjusting the rocker arms
Bring the exhaust valve of cylinder n° 1 to the fully
open position, then adjust the inlet valve clearance for
cylinder n° 3 and the exhaust valve clearance for
cylinder n° 4.
Use the same method for the other cylinders following
the order given in the table below. To adjust the rocker
arms, use tool Mot. 647.
Clearance (in mm) when the engine is cold:
Inlet 0.20 ± 0.02
Exhaust 0.25 ± 0.02
83366R
Exhaust valve to the fully open
position
Inlet valve to be adjusted. Exhaust valve to be adjusted.
134
342
421
213