Filter
Top Products
31
The GEONAV will insert a waypoint in the port position and
delete automatically the existing route, then go back to
Navigation mode activating automatically the Autozoom
function.
How to delete the whole route
In Navigation mode, it is possible to delete the whole route by
pressing the CLR key. Press ENT to confirm or CLR to abort the
operation.
In Cursor mode, it is necessary to keep the CLR key pressed for
more than 3 seconds (if the key is kept pressed for a shorter
time, the GEONAV will go back to Navigation mode).
How to edit a route in Cursor mode
It is often necessary to delete a single waypoint or modify its
position; the GEONAV allows performing these operations in a
very simple way and by way of few keys.
• Deleting a route segment
Position the cursor exactly on the segment to delete with the
CURSOR key, then press CLR to confirm.
• Deleting a waypoint in a plotted route
Position the cursor exactly on the waypoint to delete with
the CURSOR key, then press CLR to confirm.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••