Filter
Top Products
20
•••••••••••••••••••••••••••••••••••••••••••••••••
To activate the Chart Rotation function, enter the Navigation
mode, press ENT to display the menu, select SET, then CHART
ROTATION and ON. A message will prompt the user to select
the requested maximum range before activating the chart
rotation.
Local time
By this function the user can enter local time instead of
Greenwich time (GMT) supplied by the GPS receiver.
To enter local time, enter the Navigation mode, then press ENT
till the main menu bar is displayed; by using the CURSOR key,
select SET, TIME and then LOC.
A window will allow entering local time by the CURSOR key.
Press ENT to confirm the operation. To cancel the visualization
of local time, enter the Navigation mode, then press ENT till the
main menu bar is displayed; select SET, TIME and then GMT.
Contrast
Enter the Navigation mode and press ENT till the menu bar is
displayed, then select CONTRAST and adjust the contrast with
the CURSOR key.
The contrast can be adjusted at start-up (when the initial
WARNING message is shown) or when the satellite window is
displayed; press the CURSOR key and adjust the contrast by
the arrows.
Track
The Track function allows displaying the route actually
followed by the boat (during the latest hour approximately);
the route is represented by a dashed line.
To enable or disable the Track, press ENT repeatedly until the
menu bar is shown. Press CURSOR to select the SET option,
and the TRACK item, then to enable or disable the function.
Press ENT or CLR to confirm the operation and exit.
Functional Characteristics