Filter
Top Products
30
The GEONAV will insert a waypoint in the port position,
append the new leg to the existing route (if no route is
present, the leg will connect the waypoint to the boat’s
position) and move to Navigation mode, automatically
activating the Autozoom function.
Route to the nearest service
NOTE: this option is available only with NAVIONICS cartridges that include the Port
Service feature.
Enter the Navigation mode (by pressing the CLR key if in
Cursor mode), press the ENT key and select NEAR by the
CURSOR key; the GEONAV will display the port service catalog
and allow selecting the service.
Select the desired service, then press ENT to confirm or CLR to
exit.
The GEONAV will display the 3 ports with the selected
service, nearest to the boat’s position; by using the CURSOR
key, highlight one port at a time and check the relevant
distance and time to arrive (estimated on the current boat’s
speed). Press ENT to confirm the selection.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Route