Filter
Top Products
29
Route to the manual cursor position
Press the CURSOR key to switch to Manual mode, position the
cursor where a waypoint is to be inserted and then press the
ENT key.
The GEONAV will insert a new waypoint in the cursor
position and a new leg will be added to the existing route; if no
waypoint had been previously entered, the leg will be
connected to the boat’s position. The GEONAV will
automatically activate the Autozoom function as soon as it
switches to Navigation mode.
Route to a port
Enter the Navigation mode (by pressing the CLR key if in
Cursor mode), then press the ENT key and select the PORT
option with the CURSOR key.
The GEONAV will display the port catalog (the latest 6 ports
used will be highlighted at the top of the screen) and allow
selecting the port.
Select a port by the CURSOR key and confirm by ENT.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••