Filter
Top Products
User's manual MobileNavigator | 5
- 82 - Selecting a map
6.1 Selecting a map
Provided maps There are additional maps included in the delivery on DVD. In
case you want to use one of these maps, copy it via a card
reader to a memory card.
Note: Maps for which you have not purchased the right of use
must be activated. Please refer to the separate manual in the
enclosure.
Proceed as follows:
1. Connect your PC and your Pocket PC via ActiveSync.
2. Insert the MobileNavigator DVD-ROM 1 into your DVD -
drive.
The Installer-Tool Starts automatically.
3. Click "Transmit map".
4. Follow the instructions on the screen.
Follow then the instructions given below in "Selecting a map".
Note: In case the Installer-Tool does not start automatically,
start the Windows-Explorer. Select the directory of your DVD
drive and double-click the "Setup.exe" file.
Note: Maps for which you have not purchased the right of use
must be activated. Please refer to the separate manual in the
enclosure.
Selecting a map
To load another map which is available on the currently inserted
memory card, proceed as follows:
1. If the desired map is on another memory card than the
currently inserted one, open the M
AIN SCREEN and tap the
Quit button.
1a Remove the memory card, which is currently inserted.
1b Insert the memory card, which contains the map you want to
work with.
1c Start MobileNavigator over.
Note: You need not execute steps 2 to 4 unless there is more
than one map stored on the inserted memory card.