Filter
Top Products
User's manual MobileNavigator | 5
- 116 - Settings
8.1.13 Format
Units On the FORMAT screen, determine which units are to be used for
time and distance indications.
Setting Signification
Time
Tap the Time field to toggle between
12 hours (AM/PM) and 24 hours time
format.
Distance
Tap the Distance field to toggle between
kilometres or miles distance units.
8.1.14 GPS
GPS On the GPS screen, configure the GPS receiver.
Tap Automatic detection when you have reconnected or
changed your GPS-receiver. Follow the instructions on the
screen.
Tap Manual settings when automatic detection is not
successful. Set the following values:
Setting Signification
Receiver
Tap the Type of receiver field. Select the
appropriate receiver from the list and tap
OK.
COM port
Tap the COM-port field and indicate the
COM / USB-port used by the receiver.
Baud
If you are using a GPS receiver of another
brand than NAVIGON (Type: Other
receiver), enter the respective Baud rate
into the Baud field.
Automatic search