Filter
Top Products
User's manual MobileNavigator | 5
- 26 - Command buttons
TMC
The TMC symbol is placed at the bottom of the screen. The
different TMC-icons have the following significance:
Symbol Significance
No TMC
A TMC-module is not inserted or not
connected correctly.
-OR-
The GPS-receiver is turned off or not
connected correctly.
Searching for
broadcast station
The TMC-receiver is ready but cannot
receive TMC signals. This is the case
when, e.g., you are in an area where
TMC is not available.
TMC ready
TMC signals are being received.
TMC
Tap this icon to display TMC information.
For details on the TMC functionality, please refer to "Using TMC
functionality", page 100.
3.3.1 Command buttons with caption
Command buttons You will find command buttons with captions on almost every
screen of MobileNavigator. There is three groups of command
buttons:
1. Command buttons with a defined functionality.
These buttons are designed to execute a functionality, which
is indicated by their caption. They are normally buttons like
Save, OK, Cancel, Select map, One destination etc.
2. Buttons to select one of two possibilities.
These buttons are designed to select one of two possibilities.
Normally, the current state is indicated by the caption of the
button. They are normally buttons like User mode, Yes-No,
On-Off.
When you tap one of these buttons, the caption switches to
the other possibility. This change must be confirmed by
clicking another button (normally OK or Save) before the
current screen closes.
3. Buttons to enter data.
Subsequently, these buttons will be referred to as entry
fields. The caption either your last entry or <please select>.
They are buttons like Town, Street, Category (of a POI)
etc.
When you tap an entry field, another screen with a software
keyboard, a list, or with both of them opens where you can
make your entries. This entry must be confirmed by clicking