Filter
Top Products
User's manual MobileNavigator | 5
- 10 - Installing the software
2.1 Installing the software
Install the software
on your PDA…
You may find a detailed description of the software installation
procedure in the enclosed short manual.
On your MobileNavigator DVD 1, you will find the Installer-
Tool which guides you through the installation and map
transmitting procedures.
Note: ActiveSync must be installed on your PC and on your
Pocket PC. For detailed information, please refer to the manual of
your Pocket PC.
Proceed as follows:
1. Connect your PC and your Pocket PC via ActiveSync.
2. Insert the MobileNavigator DVD-ROM 1 into your DVD -
drive.
3. The Installer-Tool Starts automatically. Follow the
instructions on the screen.
Note: In case the Installer-Tool does not start automatically,
start the Windows-Explorer. Select the directory of your DVD
drive and double-click the "Setup.exe" file.
2.1.1 Restoring the files of the memory card
Restore the files of
the memory card…
1. Connect your PC and your Pocket PC via ActiveSync.
2. Insert the MobileNavigator DVD-ROM 1 into your DVD -
drive.
3. The Installer-Tool Starts automatically. Follow the
instructions on the screen.
Note: In case the Installer-Tool does not start automatically,
start the Windows-Explorer. Select the directory of your DVD
drive and double-click the "Setup.exe" file.
2.2 Installing the hardware
Survey Mount the holder of the Pocket PC and the GPS receiver before
you use the navigation system. You will also have to initialise the
GPS receiver and, if purchased, the TMC module.
Note: In case the holder and the adapter of the Pocket PC are
not supplied within the delivery, you may obtain them from our
support team, from our online-shop, or from your specialised
dealer.