Filter
Top Products
User's manual MobileNavigator | 5
Appendix - 121 -
9.1.2 Bluetooth module
Equipping the GPS
receiver with the
Bluetooth module…
1. Disconnect any cable from the GPS receiver.
2. Insert the Bluetooth module.
3. Reconnect the cables.
4. Turn the GPS receiver on.
The blue diode is blinking (in intervals of 1 second).
5. Start MobileNavigator on your Pocket PC in order to
establish the Bluetooth-connection in your navigation
software.
Note: For detailed information on Bluetooth connections
between your Pocket PC and other Bluetooth-devices, please
refer to the manual of your Pocket PC.
6. On the main screen, tap the Configuration button.
The C
ONFIGURATION screen opens.
7. Via the arrow buttons, select GPS.
Automatic detection 8. Tap Automatic detection when you have reconnected or
changed your GPS-receiver. Follow the instructions on the
screen.