Filter
Top Products
User's manual MobileNavigator | 5
Navigation - 51 -
5.3.3 Selecting destinations from the contacts list
Using a contact's
address as
destination…
Any address from the contacts list on your Pocket PC may be
used as destination for navigation or itinerary planning purposes.
In order to identify an address clearly and without ambiguity,
town, postcode, street, and house number should be indicated.
Note: Only contacts the address of which is covered by the
currently loaded map may be used for navigation or itinerary
planning purposes.
Incomplete address If an address cannot be identified without ambiguity e.g. because
there are two towns with the same name on the map,
MobileNavigator lists them all, indicating their postcodes and
districts. Select the respective town and tap OK.
If the town has been found but the street of the contact is not
indicated, you will be guided to the centre of this town.
To avoid problems, the addresses from your contacts list should
be complete.
Extended mode
1. In the MAIN MENU, tap Navigation.
The D
ESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Contacts.