Filter
Top Products
Working With Routes
Accessing the Route Planning Window
54 NAVIGON 7100 User’s Guide January 2008
NAVIGON, INC. Revision 2.0
• Current Position to specify your current position as the starting point.
3. Enter the starting point. (See the corresponding section of “Selecting Destina-
tions” on page 25.)
4. Tap the
Set Starting Point button.
The selected starting point displays next to the 0 (Starting Point) button.
Changing the starting point
On the ROUTE PLANNING WINDOW:
• Tap the Specify Starting Point field.
The STARTING POINT menu opens. To enter a different starting point, repeat the above
steps.
Entering route points
Route points are destinations on the route that you want to navigate to.
The flow number for each route point can be found on a button in front of it.
On the
ROUTE PLANNING WINDOW:
1. Tap the Add Route Point field.
The R
OUTE POINT menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of “Selecting Destinations”
on page 25.)
4. Tap the
Add button.
The selected route point is shown next to its flow number.
5. Repeat these steps for each additional destination that you want to add to your
route.
Changing the order of route points
Route points can be deleted from a route. The order of the route points can be varied as
you wish.
On the
ROUTE PLANNING WINDOW:
• Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up
- Moves the selected route stage forwards. (Example:
route point 2 becomes route point 1).
Route Point Down
- Moves the selected route point backwards.
(Example: route point 2 becomes route point 3).
Delete
- Deletes the selected route point. You are prompted to confirm
the deletion.
Note:
The start point (flow number "0") cannot be moved or deleted.