Selecting Destinations
Starting Navigation
January 2008 NAVIGON 7100 User’s Guide 41
Revision 2,0 NAVIGON, INC.
Starting Navigation
The map is open in Preview mode.
The navigation destination is depicted by a small flag. The route and the estimated trip
time are displayed.
• Tap the
Start Navigation button or start driving.
Quiting Navigation
• Tap (Back).
You are prompted to confirm the navigation cancellation.
The MAIN WINDOW opens.
No GPS reception
If the received GPS signal is insufficient, the following message appears:
You have the following options:
• Wait until GPS reception is sufficient for determining position, the route is
recalculated and you can begin navigation.
• Tap the
Cancel button. The MAIN WINDOW opens. Your destination is saved in
the L
AST DESTINATIONS list.
• Tap the
Demo button. The route is calculated using the center of the specified
location as starting point. Subsequently, navigation of the route is simulated.
•Tap (Back
) to end the demonstration.
Arriving at Your Destination
A message displays when you have reached your destination.
Your current position, indicated by an orange triangle, is shown on the map.