Filter
Top Products
6G7 ENGINE (E-W) -
Intake Manifold
11A-7-2
INSTALLATION SERVICE POINTS
"
A
A
O-RING / WATER PIPE
(1) Wet the O-ring (with water) to facilitate assembly.
Caution
D
Keep the O-ring of oil or grease.
"
B
A
THERMOSTAT
(1) Install th e thermostat in t he thermostat case with its jiggle
valve located at the top position.
"
C
A
HEATER INLET AND OUTLET PIPES
(1) Attach the outlet and inlet pipes in this order, one on the
top of the other.
"
D
A
APPLICATION OF SEALANT TO ENGINE
COOLANT TEMPERATURE SENSOR
Specified sealant:
3M Nut Locking Part No. 4171 or equivalent
"
E
A
SEALANT APPLICATION TO ENGINE COOLANT
TEMPERATURE GAUGE UNIT
Specified sealant:
3M ATD Part No. 8660 or equivalent
PWEE9615
E
Dec. 1996Mitsubishi Motors Corporation
6EN0594
O-ring
Water pump
Water inlet pipe
7EN0876
Jiggle valve
7EN0877
Outlet pipe
Inlet pipe
Surge tank stay
9EN0091
1EN0338
Sealant