Filter
Top Products
4G6 ENGINE (E-W) -
Front Case, Counterbalance Shafts and Oil Pan
11A-10-8
NOTE
(1) Be sure to install the oil pan quickly while the sealant
is wet (within 15 minutes).
(2) After installation, keep the sealed area away from
the oil and coolant for approx. one hour.
(3) Note the difference in bolt lengths at the location shown.
"
M
A
OIL PAN UPPER / OIL PAN LOWER
INSTALLATION
(1) Clean both mating surfaces of oil pan and cylinder block.
(2) Apply a 4 mm wide bead of sealant to the entire
circumference of the oil pan upper flange.
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or
equivalent
NOTE
(1) Be sure to install the oil pan quickly while the sealant
is wet (within 15 minutes).
(2) After installation, keep the sealant area away from
the oil and coolant for approx. one hour.
(3) Note the difference in bolt lengths at the location shown.
RevisedPWEE9616-A
E
Aug. 1998Mitsubishi Motors Corporation
Boltholeportion
Oil pan upper
Groove
portion
M6
´
16
mm
Timing belt side