Filter
Top Products
4G6 ENGINE (E-W) -
Rocker Arms and Camshaft
11A-8-4
(3) Fit special tool MD998441 onto the lash adjuster.
(4) While gently pushing down the internal steel ball using
special tool MD998442, move the plunger through 5 to
10 strokes until it slides smoothly. In addition to eliminating
stiffness in the plunger, this operation will remove dirty
oil.
Caution
D
The steel ball spring is extremely weak, so the
lash adjuster’s functionality may be lost if the
air bleed wire is pushed in hard.
NOTE
If the plunger remains stiff or the mechanism appears
otherwise abnormal, replace the lash adjuster.
(5) Remove the lash adjuster from the container. Then, push
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
(6) Fit special tool MD998441 onto the lash adjuster.
(7) Place the lash adjuster in container B. Then, gently push
down the internal steel ball using special tool MD998442
and move the plunger through 5 to 10 strokes until it
slides smoothly. This operation will clean the lash
adjuster’s pressure chamber.
Caution
D
The steel ball spring is extremely weak, so the
lash adjuster’s functionality may be lost if the
air bleed wire is pushed in hard.
(8) Remove the lash adjuster from the container. Then, push
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
RevisedPWEE9616-A
E
Aug. 1998Mitsubishi Motors Corporation
MD998441
MD998442
Dieselfuel
Diesel fuel
MD998442
MD998441
MD998442
Dieselfuel
Diesel fuel
MD998442