Filter
Top Products
58
Fish Alarm
Use fish alarm to receive an audible alarm when fish or other objects
are detected by the Fish I.D. feature (Fish I.D. must be turned on for
the Fish Alarm to work). A different tone sounds for each fish symbol
size shown on the display.
To turn on fish alarm:
1. Press MENU|MENU|↓ to ALARMS|ENT|↓ to SONAR ALARMS|ENT.
2. Press ↓ to
FISH ALARM|ENT. Press EXIT repeatedly to get back to the
main page.
NMEA 2000 Alarm
The NMEA 2000 Alarm can monitor multiple EP-10 Fuel Flow and EP-
15 Fluid Level sensors. You can set a threshold for each alarm in its
corresponding Percent box. Thresholds give you control over when the
alarm will go off. You may want the alarm to go off when the black wa-
ter tank is filled to 75 percent of its capacity, likewise, you may want to
know when the fuel level falls below 30 percent of tank capacity.
To get to the NMEA 2000 Alarms menu, press
MENU|MENU, select
ALARMS and press ENT. Choose NMEA 2000 ALARMS and press ENT.
NMEA 2000 Alarms selected from alarms menu (left). NMEA 2000
Alarms menu (right).
1. With the Fluid Level Device window highlighted, press ENT and use
↑ ↓ to select the device you want to monitor, then press
ENT.
2. To enable the Full Alarm, highlight
FULL ALARM Enabled box and
press
ENT to turn on (check) the alarm. Press → to the Percent box and
press
ENT. Use the ↑ ↓ keys to select the first number, then press → to
move to the next number. When the desired percentage has been en-
tered, press
ENT.