Lowrance electronic LMS-334c iGPS GPS Receiver User Manual


 
124
To transfer data from the unit to the MMC: press
ENT.
To transfer data from the MMC to the unit: press to
LOAD|ENT.
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press to
SAVE DATA|ENT. If you want to rename the file (as
shown in the following figures), press
ENT to activate the selection box.
Press to change the first character, then press to the next char-
acter and repeat until the name is correct. Then, press
ENT| to SAVE
DATA|ENT.
The unit will display first a progress message followed by a completion
message when the data transfer is finished. To return to the Page view,
repeatedly press
EXIT.
These (left to right) figures show the menu sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT to activate the selec-
tion box, use to highlight the file, then press
ENT to accept the se-
lection. Next, press to
LOAD DATA|ENT. The unit will display a comple-
tion message when the data transfer is finished. To return to the Page
view, press
EXIT repeatedly.