Filter
Top Products
119
New trail named Trail 2 is created when Trail 1 is set to inactive. New
travel will be recorded in this trail, which is active and visible. Trails
do not have to be visible in order to be active.
You can save and recall up to 10 different plot trails, which can be cop-
ied to your MMC for archiving or for transfer to your MapCreate soft-
ware.
Tip:
Another quick way to stop recording one trail and begin a new one
is to use the New Trail command: Press
MENU|MENU|↓ to MY
TRAILS|ENT|ENT.
Caution:
You also have the option of completely turning off trail record-
ing, under the trail Options command. However, if the Update
Active Trail option is turned off, it will cancel the automatic
trail creation feature.
Displaying a Saved Trail
The active trail is automatically displayed on the with the factory de-
fault settings. You can selectively turn trail display off and on for any
saved or active trail. In the Saved Trails List, visible trails will have a
check mark in front of the trail name.
To turn off trail display:
1. Press
MENU|MENU|↓ to MY TRAILS|ENT.
2. Press ↓ to Saved Trail list, then use ↑ ↓ to select the desired Trail
Name|
ENT.
3. Press ↓ → to
VISIBLE|ENT. Repeat these steps to make the trail visible
again. To return to the main page display, press
EXIT repeatedly.