Lowrance electronic LMS-334c iGPS GPS Receiver User Manual


 
162
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
2. From the Map Page, press
MENU| to MAP DATA|ENT| to MAP
CHOICE|ENT. Select the Map Name, then press ENT|EXIT|EXIT.
Navionics Map Choice highlighted. Press Ent to select the desired
Navionics map from the Map Choice drop down box.
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
NMEA 2000
On the GPS menu, the NMEA 2000 entry provides a way to monitor,
configure and calibrate devices on the LowranceNet. For more informa-
tion, see the document, Instructions for Using LowranceNET
NMEA
2000 Devices with LMS-334, LMS-339 and GlobalMap
3600. If the
document is missing, download it free at www.lowrance.com or contact
customer service.
Overlay Data
On any Page display except Satellite Status, you can float or overlay
GPS or navigation data on the screen with the Overlay Data command.
If you left your watch at home, you could display the local time on top of
the map. Or, if you wanted to see details about your route and trip, you
could show your bearing, course, average speed and trip distance. The
various data available from your unit are divided into categories in the
Overlay Data menu. These categories include GPS Data, Navigation,
Trip Calculator, Time, Sonar Data and Sensor Data.