Filter
Top Products
113
Sequence for setting waypoint. Figure 1: press WPT twice to call up
Find Waypoint screen (Figure 2) and set a waypoint. Figure 3: confir-
mation message. Figure 4: Waypoint number and symbol are visible.
NOTE:
The Quick Save method uses a default waypoint symbol, unless you
edit an existing waypoint and change its symbol. (Edit Waypoint
Symbol is described in Sec. 7.) The unit will remember the symbol
you chose and use it the next time you save a waypoint. To revert to
the default symbol, edit a waypoint and choose the original symbol
or use the Reset Options command.
Create Waypoint on Map
1. Use the arrow keys to move the cursor to the place where you want
to make a waypoint.
2. Press
WPT|WPT. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.
Figure 3. Figure 4.
Figure 1. Figure 2.