Filter
Top Products
2
DATUMS ............................................................................................................ 62
PCF (Position Correction Factor)................................................................ 64
POSITION FILTER.............................................................................................. 65
GPS SIMULATOR............................................................................................... 65
PRESET ............................................................................................................ 66
SONAR OPERATION ................................................................................................. 67
INTRODUCTION
The GlobalMap 2000 is a high quality, wide screen mapping unit with
performance that is second to none in its class. Using menu features and
“soft-key” operation, it’s easy to use and sets new standards in mapping
versatility and performance. The built-in reference map (background map)
includes almost the whole world. Over 70% of the map’s detail is in the 48
contiguous states, Hawaii, and southern Canada. This unit also has the
ability to read highly detailed maps of inland areas available on Lowrance
IMS SmartMap™ cartridges or C-MAP™ mapping cartridges which cover
most coastal areas around the world. (Both cartridges require the optional
Lowrance Maplink™ cartridge reader.)
Position information can come from any Loran-C or GPS receiver via the
industry-standard NMEA interface or directly from a Lowrance GPS
module. DGPS capability is also included.
Installing a SAM (Sonar Access Module) and Lowrance transducer, the
GlobalMap 2000 turns into a dual purpose unit, including a full-featured
sonar with chart displays and digital bottom depth indicators. The sonar
can be used by itself or in the “split-screen” mode with both sonar and
mapping information shown side-by-side.
MOUNTING - Bracket Mount
Install it in any convenient location, provided there is clearance behind the
unit when it is tilted for the best viewing angle. Holes in the bracket base
allow wood screw or through-bolt mounting. You may need to place a piece
of plywood on the back of thin fiberglass panels to secure the mounting
hardware. Make certain there is enough room behind the unit to attach the
power and interface cables.
SLOT
PLUGS
FRONT