Filter
Top Products
33
The “Center” mode (shown be-
low right) keeps your present
position in the center of the map-
ping display. The map is always
in the “north-up” mode and
scrolls around your present po-
sition as you travel. This mode
is similar to the north-up mode,
it just moves the map instead of
your present position. Using this
method always makes it easy
to find your position on the map.
To change from the north-up to
the course-up or center modes,
simply press the MENU key,
then press the key next to the
“Mapping Setup...” label. Now
press the key next to the “North
Up Course Up Center” label
until the check mark is on the
desired box. Press the CLR
key to return to the map screen.
To switch back to the north-up
view, simply repeat the above
steps.
Map Names
Major cities, highways, rivers, lakes, states, and more are shown on the
Lowrance background map and Lowrance cartridges. (C-MAP cartridges
and background map also show the names of many of these landmarks,
but can’t be turned off.) When the mapping unit is first turned on or after it’s
preset, these names are shown on the map. To turn the names off, press
the MENU key, then press the key next to the “Mapping Setup...” label. Now
press the key next to the “Map Names” label. This moves the check mark
from the “ON” to the “OFF” box. Press the CLR key to return to the map
screen.
Area Fill
This unit can fill land masses or water with a gray background. Water is
filled with gray when the unit is first turned on or after a preset. To fill the
land with gray and leave the water white, press the MENU key, then press
the key next to the “Mapping Setup” label. Now press the key next to the