Filter
Top Products
19
KEYBOARD
The keyboard has keys arranged in a vertical column on the left, plus a
horizontal row at the bottom. A ten-key pad and arrow keys on the right side
of the screen let you enter and change data on the screen. The menu key
in the bottom left corner of the keyboard activates the first menu page. The
keys along the bottom of the screen are used to switch between maps and
the digital navigation, steering, and position screens. The Event Marker
key lets you place icons on the display, while the Man Overboard key is
used for emergencies.
MAP - Press this key to show the Mapping Screen.
NAV - This key shows the digital navigation screen.
CARTRIDGE
ADAPTER
SMARTMAP
CARTRIDGE
MAPLINK
Notice!
You can attach up to seven Maplinks to the GlobalMap 2000. This lets
you use different maps without having to unplug one and replace it with
another when you move out of the first map’s area. This also allows the
mounting of the Maplinks under the dash, out of sight.
If you’re not using the Maplink or Lowrance Inland Mapping Modules,
connect the small gray terminator plug supplied with the GlobalMap 2000
into the small connector on the back of the unit. This will protect the
connector on the back of the unit from the elements.
The Maplink accepts the large C-Map cartridges without adapters. Low-
rance IMS SmartMap cartridges and Lowrance supplied C-Map cartridges
require an adapter that comes with the Maplink as shown below.